Treklite Kayak Seat: full assembly manual

The Treklite Kayak Seat is a 3-position adjustable (high, low, recumbent) lightweight seat with breathable mesh, lumbar support, integrated gear tracks on the frame, and track-mounted cup holder. Fits the Horizon Elevated Perch Seat for extra height. 2-step assembly (insert backrest hinge, bolt to base) plus a 3-step Highlander mounting procedure. Standard issue on every Highlander AirTrek. PDF download below.

Simple, smart, and ready for long sessions. The Treklite Seat is built for paddlers who need comfort, support, and rigging potential without extra bulk. Three-position high-low-recumbent adjustability, breathable mesh padding, integrated lumbar support — keeps you cool and locked in for long sessions. Integrated gear tracks on the seat frame let you mount cup holders or accessories exactly where you need them. Lightweight yet rugged. Pairs with the Horizon Elevated Perch for extra height.

The Treklite is the standard-issue seat on every Highlander AirTrek inflatable. It's also sold separately for use on other watercraft.

This article is the structured summary of the full Treklite Kayak Seat Assembly Manual. Download the printable PDF below.

Features

3-position high, low, recumbent adjustable kayak seat
Lightweight and durable frame
Integrated gear tracks for accessory mounting
Breathable water-wicking fabric
Lumbar support for comfort on long paddles
Equipped with track-mounted cup holder
Fits Horizon Elevated Perch Seat

What ships in the box

Major components:

Backrest (1) — with mounting straps
Seat base (2) — with seat risers and gear tracks

Hardware kit:

A — Ø6×20-M5-7 bolts ×2
B — M5 nuts ×2
C — Mounting strap ×1
Plus combination wrench + Allen key

Assembly walkthrough (2 steps)

Step 1 — Connect backrest to base

Insert the seat backrest hinge post into the seat base hinge brackets.

Step 2 — Bolt + adjust seat strap

Thread the seat strap through the seat strap buckle and adjust the lean angle to your preference.

Use the provided bolt (part A) and nut (part B) to secure the seat backrest to the seat base hinge bracket.

Mounting to a Highlander Series inflatable (Step 3)

Loop the mounting strap around the seat frame and pass the clip through the loop.
Clip the seat strap to the nearest D-Ring that's at least 6 inches from the seat. Repeat for all 4 seat straps.
Tighten the seat strap using the tension buckles after securing all 4.

User guide — 3 functions

Backrest Straps — Tighten or loosen the straps to recline or raise the seat back.
Gear Tracks — Use the sidesaddle gear tracks to mount steering handles, cup holders, and standard T-bolt accessories.
Seat Risers — Fold the seat risers underneath the seat to change between high, low, and recumbent positions.

Hi-low seating adjustments

Fold the seat risers underneath the seat to switch between:

High position — risers down, seat at full height
Low position — risers tucked, seat closer to the deck for surf launches and lower CoG
Recumbent position — risers re-positioned, seat reclined further back for a longer paddle posture

Pairing with the Horizon Elevated Seat Perch

The Treklite Seat is compatible with the Horizon Elevated Seat Perch for stand-up sight fishing height. Same bracket geometry as the Horizon Pro Seat — the perch bolts directly to the Treklite frame.

Download the full PDF

The Treklite Kayak Seat Assembly Manual PDF contains all illustrated diagrams.

[PDF download link will be populated once the manual is uploaded to Shopify Files.]